Introduction

Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.

Deep groove ball bearing has simple structure, easy to use, is the largest production capacity and the most widely used type of bearings. This kind of bearings mainly used to bear radial load, also can absorb a certain amount of axial load. When bearing radial clearance increases, has the function of angular contact ball bearings as the larger axial load. Compared with the same size of other types, such bearing small friction coefficient, high limit speed.

Features and Benefits

● Low friction and running temperatures, low noise and vibration

● High running speeds

● High quality and performance capabilities for your application

● Accommodate radial loads and axial loads in both directions

● Available with a variety of greases for most conditions, including food quality grease, high temperature grease and Solid Oil

● Increased reliability and provide long bearing and lubricant service life

Application

Deep groove ball bearing  can be used for transmission, instruments, electric machinery, household electrical appliances, internal combustion engines, transportation vehicles.

Agriculture machinery, construction machinery, engineering machinery, etc.

Attention

For deep groove ball bearings, the bearing load is too small during operation, which will cause sliding between the ball and the raceway, which becomes the cause of scratches. In particular, large deep groove ball bearings with heavy balls and cages have this tendency. In many cases, bearing corrosion will occur. There are many reasons for bearing corrosion. The most common factors in our daily life are mainly the following factors:
1) Intrusion by moisture and dirt due to poor sealing device;
2) Bearings are not used for a long time, beyond the anti-rust period, lack of maintenance.
3) The roughness of the metal surface is large;
4) Contact with corrosive chemical media, the bearing is not cleaned, the surface is stained with dirt, or the bearing is touched with sweaty hands. After the bearing is cleaned, it is not packaged or installed in time, exposed to the air for a long time, and is attacked by air moisture. Contaminate
5) Ambient temperature and humidity and contact with various environmental media; the rust inhibitor fails or the quality does not meet the requirements.

Parameters