Featured-products
-
New Arrival China China OEM Top Grade Insert Bearing UK300 Series UK306
The inner ring and the shaft are fixed tightly by two setting screws in the bearing with wire jacking. Under the working condition with vibration and impact, under the working condition with frequent repeated starting, and under the working condition with large load or high speed, the fixing effect of the fixing screw can be greatly increased by processing the fixing groove or pit at the corresponding position of wire jacking on the shaft.
-
China Wholesale China High Quality Nzsb 608z Bearing 608 Bearing 608 Extended Inner Race Glider Bearing
●Non-separating bearing.
●Suitable for high-speed applications.
●The inner hole range is 5 to 180 mm.
●Widely used bearing type, especially in motor applications and in electric motors.
-
China Gold Supplier for China Low Noise High Quality Self-Aligning Ball Bearings 1208 1208K 1209 1209K for Agricultural Machinery
●Effective in preventing current from passing through, even alternating current
●The rolling body has low mass, low centrifugal force and therefore low friction.
●Less heat is generated during operation, which reduces the load on the lubricant. The grease lubrication coefficient is set at 2-3.The life rating calculation is therefore increased
●Good dry friction performance
-
One of Hottest for China Stainless Steel 4X7X2mm Hybrid Ceramic Reel Bearing
●High performance silicon nitride based structural ceramics use as structural materials.
●Its good wear resistance, corrosion resistance, oxidation resistance, low specific gravity and high strength .
●Widely used in machinery, metallurgy, chemical industry, transportation, energy, environmental protection and textile and other industries.
●It is one of the most excellent high-performance ceramic materials, the most promising structural ceramics.
-
China OEM China Adapter Sleeves, Withdrawal Sleeves H211 H210 for Agricultural Machinery
●The Withdrawal sleeve is a cylindrical journal
●It used for both optical and stepped shafts.
●The detachable sleeve can only be used for step shaft. -
OEM Manufacturer China Sinotruck HOWO Spare Parts Steering Knuckle Lock Nut (AZ9100411140)
●Friction increase
●Excellent vibration resistance
●Good wear resistance and shear resistance
●Good reuse performance
●Provides absolute resistance to vibration
-
Hot Selling for China Adapter Sleeves for Metric Shafts H308e H2308 H2308e H209 H309 H309e H2309 H210 H310 H310e H2310 H211 H311 H311e H2311 H212 H312 H312e H2312
●Adapter sleeves are the most commonly used components for positioning bearings with tapered holes on cylindrical shafts
●Adapter sleeves are widely used in places where light loads are easy to disassemble and assemble.
●It can be adjusted and relaxed, which can relax the processing precision of many boxes, and can greatly improve the work efficiency of box processing
●It is suitable for the occasion of large bearing and heavy load. -
Reasonable price for China Stainless Steel 304 Vibration Sifter (ZS-800)
●It is installed between the clutch and the transmission
●The clutch release bearing is an important part of the car
-
Quoted price for China Thrust Ball Bearings Used on Water Pump
●It’s designed to withstand high-speed thrust loads
●It consists of a washer-shaped ring with a ball rolling groove
●Thrust ball bearings are cushioned
●It’s divided into flat seat type and self-aligning ball type
●The bearing can bear axial load but not radial load
-
Reasonable price for China LHSA 4 Female Thread Self-Aligning Rod End Balls Joint Bearing Used In Link Mech-anisms In Automobiles
●It has the same tuning function as the automatic self-aligning ball bearing
● It can bear radial load and axial load in two directions
● Large radial load capacity, suitable for heavy load, impact load
●Its characteristic is that the outer ring raceway is spherical with automatic centering function
-
China Cheap price China Deep Groove Stainless Steel Ball Bearing
● Mainly used to accept radial load, but also can withstand a certain axial load.
● When the radial clearance of the bearing increases, it has the function of angular contact ball bearing.
● It can bear large axial load and is suitable for high speed operation.
-
New Fashion Design for China Single/Double Row Deep Groove, Angular Contact, Aligning, Thrust, Insert, Pillow Block, Ball/Cylindrical, Sphreical, Tapered, Needle, Roller Rolling Bearing
● The design is basically the same as that of single row deep groove ball bearings.
● Besides bearing radial load, it can also bear axial load acting in two directions.
● Excellent compacts between raceway and ball.
● Large width, large load capacity.
● Only available as open bearings and without seals or shields.