High quality insert bearing with housing UCP X00
Vertical Pedestal Bearing
● Rigid integral structure, easy to install.
● Wide inner ring: conducive to jacking lock, rigid better.
● Top wire: two top wires with an Angle of 120 degrees on the inner ring to ensure easy fastening of the bearing to the shaft.
● Retaining ring: there is one on both sides, will effectively block out the dust.
● Contact rubber seal: it is installed on the inside of the retainer rings on both sides to ensure the grease is lubricated effectively between the rolling body and the raceway.
● Grease nozzle: From where new grease can be injected.
● Adjustable sphere: when the axis has inevitable deformation, or installation is difficult to ensure the coaxiality, can automatically adjust compensation.
Application
UCP main uses: transmission gear, general machinery, etc.
Parameters
| Bearing Unit | Shaft Dia. | Dimensions(in.)or (mm) | Bolt Used | Bearing | Housing | Weight | |||||||||||||||||||||||||
| d | |||||||||||||||||||||||||||||||
| NO. | (in.) | (mm) | h | a | e | b | s2 | s1 | g | w | Bi | n | (mm) (in.) | NO. | NO. | (kg) | |||||||||||||||
| UCP | X05 | 25 | 1 | 3/4 | 6 | 1/4 | 4 | 11/16 | 2 | 1 | 21/32 | 45/64 | 3 | 11/32 | 1.5000 | 0.62660 | M14 | 1/2 | UC | X05 | |||||||||||
| X05-14 | 7/8 | 44.4 | 159 | 119 | 51 | 25 | 17 | 18 | 85 | 38.1 | 15.9 | X05-14 | P | X05 | 1.5 | ||||||||||||||||
| X05-16 | 1 | X05-16 | |||||||||||||||||||||||||||||
| UCP | X06 | 30 | UC | X06 | |||||||||||||||||||||||||||
| X06-18 | 1 | 1/8 | 1 | 7/8 | 6 | 7/8 | 5 | 2 | 1/4 | 1 | 21/32 | 25/32 | 3 | 45/64 | 1.6890 | 0.6890 | M14 | 1/2 | X06-18 | P | X06 | 2.00 | |||||||||
| X06-19 | 1 | 3/16 | 47.6 | 175 | 127 | 57 | 25 | 17 | 20 | 94 | 42.9 | 17.5 | X06-19 | ||||||||||||||||||
| X06-20 | 1 | 1/4 | X06-20 | ||||||||||||||||||||||||||||
| UCP | X07-20 | 1 | 1/4 | UC | X07-20 | ||||||||||||||||||||||||||
| X07-22 | 1 | 3/8 | 2 | 1/8 | 8 | 5 | 21/32 | 2 | 1/4 | 1 | 3/16 | 21/32 | 55/64 | 4 | 1/8 | 1.9370 | 0.7480 | M14 | 1/2 | X07-22 | P | X07 | 2.70 | ||||||||
| X07 | 35 | 54.0 | 203 | 144 | 57 | 30 | 17 | 22 | 105 | 49.2 | 19.0 | X07 | |||||||||||||||||||
| X07-23 | 1 | 7/16 | X07-23 | ||||||||||||||||||||||||||||
| UCP | X08-24 | 1 | 1/2 | 2 | 5/16 | 8 | 3/4 | 6 | 5/32 | 2 | 5/8 | 1 | 1/4 | 25/32 | 1 | 1/32 | 4 | 29/64 | 1.9370 | 0.7480 | M16 | 5/8 | UC | X08-24 | |||||||
| X08 | 40 | 58.7 | 222 | 156 | 67 | 32 | 20 | 26 | 113 | 49.2 | 19.0 | X08 | P | X08 | 3.50 | ||||||||||||||||
| UCP | X09-26 | 1 | 5/8 | UC | X09-26 | ||||||||||||||||||||||||||
| X09-27 | 1 | 11/16 | 2 | 5/16 | 8 | 3/4 | 6 | 5/32 | 5 | 5/8 | 1 | 5/16 | 25/32 | 1 | 1/32 | 4 | 9/16 | 2.0315 | 0.7480 | M16 | 5/8 | X09-27 | P | X09 | 3.60 | ||||||
| X09-28 | 13/4 | 58.7 | 222 | 156 | 67 | 33 | 20 | 26 | 116 | 51.6 | 19.0 | X09-28 | |||||||||||||||||||
| X09 | 45 | X09 | |||||||||||||||||||||||||||||
| UCP | X10-31 | 1 | 15/16 | 2 | 1/2 | 9 | 1/2 | 6 | 23/32 | 2 | 7/8 | 1 | 13/32 | 25/32 | 1 | 1/16 | 4 | 31/32 | 2.1890 | 0.8740 | UC | X10-31 | |||||||||
| X10 | 50 | 63.5 | 241 | 171 | 73 | 36 | 20 | 27 | 126 | 55.6 | 22.2 | M16 | 5/8 | X10 | P | X10 | 4.40 | ||||||||||||||
| X10-32 | 2 | X10-32 | |||||||||||||||||||||||||||||
| UCP | X11 | 55 | UC | X11 | |||||||||||||||||||||||||||
| X11-32 | 2 | 2 | 3/4 | 10 | 1/4 | 7 | 1/4 | 3 | 1/8 | 1 | 13/32 | 1 | 1 | 3/16 | 5 | 15/32 | 2.5630 | 1.0000 | M20 | 3/4 | X11-32 | P | X11 | 6.30 | |||||||
| X11-35 | 2 | 3/16 | 69.8 | 260 | 184 | 79 | 36 | 25 | 30 | 139 | 65.1 | 25.4 | X11-35 | ||||||||||||||||||
| X11-36 | 2 | 1/4 | X11-36 | ||||||||||||||||||||||||||||
| UCP | X12 | 60 | UC | X12 | |||||||||||||||||||||||||||
| X12-36 | 2 | 1/4 | 3 | 11 | 1/4 | 8 | 3 | 9/32 | 1 | 39/64 | 1 | 1 | 17/64 | 5 | 31/32 | 2.5630 | 1.0000 | M20 | 3/4 | X12-36 | P | X12 | 7.40 | ||||||||
| X12-38 | 2 | 3/8 | 76.2 | 286 | 203 | 83 | 41 | 25 | 32 | 152 | 65.1 | 25.4 | X12-38 | ||||||||||||||||||
| X12-39 | 2 | 7/16 | X12-39 | ||||||||||||||||||||||||||||
| UCP | X13-40 | 2 | 1/2 | 3 | 11 | 1/4 | 8 | 3 | 9/32 | 1 | 39/64 | 1 | 1 | 17/64 | 6 | 1/16 | 2.9370 | 1.1890 | M20 | 3/4 | UC | X13-40 | P | X13 | 7.70 | ||||||
| X13-40 | 65 | 76.2 | 286 | 203 | 83 | 41 | 25 | 32 | 154 | 74.6 | 30.2 | X13 | |||||||||||||||||||
| UCP | X14-44 | 2 | 3/4 | 3 | 1/2 | 13 | 9 | 1/32 | 3 | 1/2 | 2 | 1/64 | 1 | 1/16 | 1 | 3/8 | 6 | 23/32 | 3.0630 | 1.3110 | M22 | 7/8 | UC | X14-44 | P | X14 | 10.60 | ||||
| X14 | 70 | 88.9 | 330 | 229 | 89 | 51 | 27 | 35 | 171 | 77.8 | 33.3 | X14 | |||||||||||||||||||
| UCP | X15 | 75 | UC | X15 | |||||||||||||||||||||||||||
| X15-47 | 2 | 15/16 | 3 | 1/2 | 13 | 9 | 1/32 | 3 | 1/2 | 2 | 1/64 | 1 | 1/16 | 1 | 3/8 | 6 | 7/8 | 3.2520 | 1.3110 | M22 | 7/8 | X15-47 | P | X15 | 11.10 | ||||||
| X15-48 | 3 | 88.9 | 330 | 229 | 89 | 51 | 27 | 35 | 175 | 82.6 | 33.3 | X15-48 | |||||||||||||||||||
| UCP | X16 | 80 | 4 | 15 | 11 | 5/32 | 4 | 1/32 | 2 | 5/16 | 1 | 1/16 | 1 | 31/32 | 7 | 11/16 | 3.3740 | 1.3425 | M22 | 7/8 | UC | X16 | P | X16 | 16.20 | ||||||
| X16-50 | 3 | 1/8 | 101.6 | 381 | 283 | 102 | 59 | 27 | 42 | 195 | 85.7 | 34.1 | X16-50 | ||||||||||||||||||
| UCP | X17 | 85 | 4 | 15 | 11 | 5/32 | 4 | 1/32 | 2 | 3/8 | 1 | 1/16 | 1 | 49/64 | 7 | 7/8 | 3.7795 | 1.5630 | M22 | 7/8 | UC | X17 | P | X17 | 16.50 | ||||||
| X16-52 | 3 | 1/4 | 101.6 | 381 | 283 | 102 | 60 | 27 | 45 | 200 | 96.0 | 39.7 | X17-52 | ||||||||||||||||||
| UCP | X18-56 | 3 | 1/2 | 4 | 15 | 11 | 5/32 | 4 | 3/8 | 2 | 3/8 | 1 | 1/16 | 1 | 49/64 | 8 | 1/32 | 4.0945 | 1.6890 | M22 | 7/8 | UC | X18-56 | P | X18 | 18.00 | |||||
| X18 | 90 | 101.6 | 381 | 283 | 111 | 60 | 27 | 45 | 204 | 104.0 | 42.9 | X18 | |||||||||||||||||||
| UCP | X20 | 100 | 5 | 17 | 13 | 9/32 | 4 | 3/4 | 2 | 33/64 | 1 | 5/16 | 2 | 3/64 | 9 | 21/32 | 4.6260 | 1.9370 | M27 | 1 | UC | X20 | P | X20 | 31.80 | ||||||
| X20-64 | 4 | 127.0 | 432 | 337 | 121 | 64 | 33 | 52 | 245 | 117.5 | 49.2 | X20-64 | |||||||||||||||||||
