SKF Bearing Shenyang General Agent Center, take a look at the installation of SKF tapered bore bearings. For larger bearings, it is recommended to use the SKF Drive-up Method. This method is better than measuring the clearance reduction and lock The tightening angle of the tightening nut saves time and is more accurate. For the installation of oversized bearings, the SKF SensorMount Method can be used to measure the expansion of the inner ring. Since the sensor is embedded in the inner ring of the bearing, it can be installed more easily, quickly and accurately.

Bearings with tapered bores are generally installed with an interference fit. The amount of interference can be determined by measuring the radial clearance reduction or the axial displacement of the inner ring on the conical journal. The methods suitable for installing spherical roller bearings with tapered holes include: measuring the clearance reduction, measuring the locking angle of the locking and closing curtain, measuring the axial advancing distance, measuring the expansion of the inner ring, small bearings with an inner diameter of 100mm or less, can be passed Measure the locking angle of the lock nut to install.