China Series housing bearing UCP300 manufacturers and suppliers

Series housing bearing UCP300

Short Description:

● Rigid integral structure, easy to install.

● Wide inner ring: conducive to jacking lock, rigid better.

● Top wire: two top wires with an Angle of 120 degrees on the inner ring to ensure easy fastening of the bearing to the shaft.

● Retaining ring: there is one on both sides, will effectively block out the dust.

● Contact rubber seal: it is installed on the inside of the retainer rings on both sides to.

Send email to us

Product Detail

Product Tags

Vertical Pedestal Bearing

Rigid integral structure, easy to install.

● Wide inner ring: conducive to jacking lock, rigid better.

● Top wire: two top wires with an Angle of 120 degrees on the inner ring to ensure easy fastening of the bearing to the shaft.

● Retaining ring: there is one on both sides, will effectively block out the dust.

● Contact rubber seal: it is installed on the inside of the retainer rings on both sides to ensure the grease is lubricated effectively between the rolling body and the raceway.

● Grease nozzle: From where new grease can be injected.

● Adjustable sphere: when the axis has inevitable deformation, or installation is difficult to ensure the coaxiality, can automatically adjust compensation.

Application

Transmission gear, general machinery, etc.

Parameters

Bearing Unit		Shaft Dia.			Dimensions(in.)or (mm)																		Bolt Used		Bearing		Housing		Weight
		d
NO.		(in.)		(mm)	h		a		e		b		s2		s1		g		w		B1	n	(mm) (in.)		NO.		No.		(kg)
UCP	305			25	1	49/64	6	7/8	5	3/16	1	3/4	25/32		21/32		5/8		3	11/32	1.4961	0.5606			UC	305
	305-14	7/8																					M14	1/2		305-14	P	305	1.6
	305-16	1			45		175		132		45		20		17		16		85		38	15				305-16
UCP	306-18	1	1/8		1	31/32	7	3/32	5	1/2	1	31/32	25/32		21/32		45/64		3	3/4	1.6929	0.6693			UC	306-18
	306			30																			M14	1/2		306	P	306	2.1
	306-19	1	3/16		50		180		140		50		20		17		18		95		43	17				306-19
UCP	307-20	1	1/4		2	13/64	8	9/32	6	5/16	2	7/32	1		21/32		25/32		4	11/64	1.8897	0.7480			UC	307-20
	307-21	1	3/8																				M14	1/2		307-21	P	307	2.8
	307			35	56		210		160		56		25		17		20		106		48	19				307
	307-23	1	7/16																							307-23
UCP	308-24	1	1/2		2	23/64	8	21/32	6	11/16	3	3/8	1	1/16	21/32		55/64		4	9/16	2.0472	0.7480	M14	1/2	UC	308-24	P	308	3.60
	308			40	60		220		170		60		27		17		22		116		52	19				308
UCP	309-28	1	3/4		2	41/64	9	21/32	7	15/32	2	5/8	1	3/16	25/32		15/16		5	5/64	2.2441	0.8661	M16	5/8	UC	309-28	P	309	4.7
	309			45	67		245		190		67		30		20		24		129		57	22				309
UCP	310-31	1	15/16		2	61/64	10	13/16	8	11/32	2	15/32	1	3/8	25/32		1	1/16	5	5/8	2.4015	0.8661	M16	5/8	UC	310-31	P	310	6.4
	310			50	75		275		212		75		35		20		27		143		61	22				310
UCP	311-32	2			3	5/32	12	7/32	9	9/32	3	5/32	1	1/2	25/32		1	3/16	6	1/16	2.5984	0.9842	M16	5/8	UC	311-32	P	311	7.8
	311			55	80		310		236		80		38		20		30		154		66	25				311
UCP	312			60	3	11/32	13		9	27/32	3	11/32	1	1/2	1		1	1/4	1	1/2	2.7953	1.0236	M20	3/4	UC	312	P	312	9.4
	312-36	2	1/4		85		330		250		85		38		25		32		165		71	26				312-36
UCP	313-40	2	1/2		3	35/64	13	3/8	10	1/4	3	17/32	1	1/2	1		1	3/8	6	15/16	2.9528	1.1811	M20	3/4	UC	313-40	P	313	10.3
	313			65	90		340		260		90		38		25		35		176		75	30				313
UCP	314-44	2	3/4		3	47/64	14	3/16	11	1/32	3	17/32	1	9/16	1	1/16	1	3/8	7	23/64	3.0709	1.2992	M22	7/8	UC	314-44	P	314	11.9
	314			70	95		360		280		90		40		27		35		187		78	33				314
UCP	315			75	3	15/16	14	31/32	11	13/32	3	15/16	1	9/16	1	1/16	1	3/8	7	25/32	3.2283	1.2598			UC	315
	315-47	2	15/16		100		380		290		100		40		27		35		198		82	32	M22	7/8		315-47	P	315	14.5
	315-48	3																								315-48
UCP	316			80	4	11/64	15	3/4	11	13/16	4	11/32	1	9/16	1	1/16	1	9/16	8	17/64	3.3858	1.3386	M22	7/8	UC	316	P	316	17.1
	316-50	3	1/8		106		400		300		110		40		27		40		210		86	34				316-50
UCP	317			85	4	13/32	16	17/32	12	19/32	4	11/32	1	25/32	1	5/16	1	9/16	8	21/32	3.7795	1.5748	M27	1	UC	317	P	317	19.2
	317-52	3	1/4		112		420		320		110		45		33		40		220		96	40				317-52
UCP	318-56	3	1/2		4	41/64	16	15/16	13		4	11/32	1	25/32	1	5/16	1	49/64	9	1/4	3.7795	1.5748	M27	1	UC	318-56	P	318	21.1
	318			90	118		430		330		110		45		33		45		235		96	40				318
UCP	319				4	59/64	18	1/2	14	3/16	4	23/32	1	31/32	1	13/32	1	49/64	9	27/32	4.0551	1.6142	M30	1 1/8	UC	319	P	319	28.2
				95	125		470		360		120		50		36		45		250		103	41
UCP	320			100	5	33/64	19	9/32	14	31/32	4	23/32	1	13/32	1	31/32	1	31/32	10	53/64	4.2519	1.6535	M30	1 1/8	UC	320	P	320	34.8
	320-64	4			140		490		380		120		50		36		50		275		108	42				320-64
UCP	322			110	5	29/32	20	15/32	15	3/4	5	1/2	2	5/32	1	9/16	1	31/32	11	21/32	4.6063	1.8110	M33	1 1/4	UC	322	P	322	43.2
					150		520		400		140		55		40		50		296		117	46
UCP	324			120	6	19/64	22	7/16	17	23/32	5	1/2	2	5/32	1	9/16	1	31/32	12	7/16	4.9606	2.0079	M33	1 1/4	UC	324	P	324	54.0
					160		570		450		140		55		40		50		316		126	51
UCP	326			130	7	3/32	23	5/8	18	29/32	5	1/2	2	5/32	1	9/16	1	31/32	13	31/32	5.3150	2.1260	M33	1 1/4	UC	326	P	326	72.1
					180		600		480		140		55		40		50		355		135	54
UCP	328			140	7	7/8	24	13/32	19	11/16	5	1/2	2	5/32	1	9/16	2	3/8	15	15/32	5.7086	2.3228	M33	1 1/4	UC	328	P	328	91.2
					200		620		500		140		55		40		60		393		145	59