China Series insert bearing with high precise UCP 200 manufacturers and suppliers

Series insert bearing with high precise UCP 200

Short Description:

● Rigid integral structure, easy to install.

● Wide inner ring: conducive to jacking lock, rigid better.

● Top wire: two top wires with an Angle of 120 degrees on the inner ring to ensure easy fastening of the bearing to the shaft.

● Retaining ring: there is one on both sides, will effectively block out the dust.

● Contact rubber seal: it is installed on the inside of the retainer rings on both sides to.

Send email to us

Product Detail

Product Tags

Vertical Pedestal Bearing

Rigid integral structure, easy to install.

● Wide inner ring: conducive to jacking lock, rigid better.

● Top wire: two top wires with an Angle of 120 degrees on the inner ring to ensure easy fastening of the bearing to the shaft.

● Retaining ring: there is one on both sides, will effectively block out the dust.

● Contact rubber seal: it is installed on the inside of the retainer rings on both sides to ensure the grease is lubricated effectively between the rolling body and the raceway.

● Grease nozzle: From where new grease can be injected.

● Adjustable sphere: when the axis has inevitable deformation, or installation is difficult to ensure the coaxiality, can automatically adjust compensation.

Application

Transmission gear, general machinery, etc.

Parameters

Bearing Unit		Shaft Dia.			Dimensions(in.)or (mm)																		Bolt Used		Bearing		Housing		Weight
		d
NO.		(in.)		(mm)	h		a		e		b		s2		s1		g		w		Bi	n	(mm) (in.)		NO.		NO.		(kg)
UCP	201			12	1	3/16	5		3	25/32	1	1/2	3/4		1/2		19/32		2		1.2205	0.5000	M10	3/8	UCP	201	P	201	0.63
	201-8	1/2			30.2		127		96		38		19		13		15		62		31.0	12.7				201-8
UCP	202			15	1	3/16	5		3	25/32	1	1/2	3/4		1/2		19/32		2		1.2205	0.5000	M10	3/8	UCP	202	P	202	0.61
	202-10	5/8			30.2		127		96		38		19		13		15		62		31.0	12.7				202-10
UCP	203			17	1	3/16	5		3	25/32	1	1/2	3/4		1/2		19/32		2		1.2205	0.5000	M10	3/8	UCP	203	P	203	0.59
	203-11	11/16			30.2		127		96		38		19		13		15		62		31.0	12.7				203-11
UCP	204	3/4		20	1	5/16	5		3	25/32	1	1/2	3/4		1/2		19/32		2		1.2205	0.5000	M10	3/8	UCP	204	P	204	0.61
	204-12				33.3		127		96		38		19		13		15		65		31.0	12.7				204-12
UCP	205-14	7/8							3	25/32	1	1/2	3/4		1/2		19/32		2		1.2205	0.5000	M10	3/8	UCP	205-14
	205-15	15/16			1	7/16	5	1/2																		205-15	P	205	0.74
	205	1		25	36.5		140		105		38		19		13		16		70		34	14.3				205
	205-16																									205-16
UCP	206-18	1	1/8																						UCP	206-18
	206			30	1	11/16	6	1/2	4	3/4	1	7/8	13/16		21/32		45/64		3	17/64	1.5000	0.6260	M14	1/2		206	P	206	1.15
	206-19	1	3/16		42.9		165		121		48		21		17		18		83		38.1	15.9				206-19
	206-20	1	1/4																							206-20
UCP	207-20	1	1/4																						UCP	207-20
	207-21	1	5/16		1	7/8	6	37/64	4	31/32	1	7/8	13/16		21/32		3/4		3	5/8	1.6890	0.6260	M14	1/2		207-21	P	207	1.4
	207-22	1	3/8				167		126		48		21		17		19		92		42.9	17.5				207-22
	207			35	47.6																					207
	207-23	1	7/16																							207-23
UCP	208-24	1	1/2		1	15/16	7	1/4	5	23/64	2	1/8	13/16		21/32		3/4		3	27/32	1.9370	0.7480			UCP	208-24
	208-25	1	9/16																				M14	1/2		208-25	P	208	1.78
	208			40	49.2		184		136		54		21		17		19		98		49.2	19				208
UCP	209-26	1	5/8		2	1/8	7	15/32	5	3/4	2	1/8	13/16		21/32		25/64		4	3/16	1.9370	0.7480			UCP	209-26
	209-27	1	11/16																				M14	1/2		209-27	P	209	2.00
	209-28	1	3/4		45.0		190		146		54		21		17		20		106		49.2	19.0				209-28
	209			45																						209
UCP	210-30	1	7/8		2	1/4	8	1/8	6	1/4	2	3/8	1		25/32		7/8		4	13/32	2.0315	0.7480			UCP	210-30
	210-31	1	15/16																				M16	5/8		210-31	P	210	2.55
	210				57.2		206		159		60		25		20		22		112		51.6	19.0				210
	210-32	2		50																						210-32
UCP	211-32	2			2	1/2	8	5/8	6	23/32	2	3/8	1		25/32		7/8		4	31/64	2.1890	0.8740			UCP	211-32
	211-34	2	1/8																				M16	5/8		211-34	P	211	3.2
	211			55	63.5		219		171		60		25		20		22		126		55.6	22.2				211
	211-35	2																								211-35
UCP	212-36	2	1/4		2	3/4	9	1/2	7	1/4	2	3/4	1		25/32		1		5	25/64	2.5630	1.0000			UCP	212-36
	212			60																			M16	5/8		212	P	212	4.4
	212-38	2	1/8		69.8		241		184		70		25		20		25		137		65.1	25.4				212-38
	212-39	2	7/16																							212-39
UCP	213-40	2	1/2		3		10	7/16	8		2	3/4	1	9/34	1		1	1/16	5	29/32	2.5630	1.0000	M20	3/4	UCP	213-40	P	213	5.1
	213			65	76.2		265		203		70		29		25		27		150		65.1	25.4				213
UCP	214-44	2	3/4		3	1/8	10	15/32	8	9/32	2	27/32	1	7/32	1		1	1/16	6	5/32	2.9370	1.1890	M20	3/4	UCP	214-44	P	214	5.7
	214			70	79.4		266		210		72		31		25		27		156		74.6	30.2				214
UCP	215			75	3	1/4	10	13/16	8	17/32	2	29/32	1	7/32	1		1	3/32	6.4173		3.0630	1.3110	M20	3/4	UCP	215
	215-47	2	15/16																							215-47	P	215	6.3
	215-48	3																								215-48
UCP	216			80	3	1/2	11	1/2	9	1/8	3	1/16	1	7/32	1		1	3/16	6.8898		3.2520	1.3110	M20	3/4	UCP	216	P	216	7.6
	216-50	3	1/8		88.9		292		232		78		31		25		30		175		82.6	33.3				216-50
UCP	217-52	3	1/4		3	3/4	12	7/32	9	23/32	3	9/32	1	7/32	1		1	1/4	7.3622		3.3740	1.3425	M20	3/4	UCP	217-52
	217			85			310		247		83		31		25		32		187		85.7	34.1	M20	3/4		217	P	217	9.2
	217-55	3	7/16		95.2																					217-55
UCP	218-56	3	1/2		4		12	7/8	10	5/16	3	15/32	1	19/64	1	1/16	1	11/32	7.8740		3.7795	1.5630	M22	3/4	UCP	218-56	P	218	11.4
	218	3	1/8		88.9		292		232		78		31		25		30		175		82.6	33.3				218